WEARTUF 500_LEONG JIN(CHANGZHOU) SPECIAL

搜索









All categories



Current position：

Homepage

/

Products

/

Wear-resistant steel series

WEARTUF 500

WearTuf 500 is a full martensitic wear-resistant steel plate that has been quenched or quenched + tempered, with a typical Brinell hardness of 500 HBW. WearTuf 500 has very high wear resistance and good weldability and cold formability. Not only is the hardness very high, WearTuf 500 also has good impact toughness, ensuring that it has satisfactory crack resistance during manufacturing and use.

Category:

Wear-resistant steel series

Keyword:

Leong Jin

Support hotline: 0519-82100613

WEARTUF 500

Product description

Feature

WearTuf 500 is a full martensitic wear-resistant steel plate that has been quenched or quenched + tempered, with a typical Brinell hardness of 500 HBW. WearTuf 500 has very high wear resistance and good weldability and cold formability. Not only is the hardness very high, WearTuf 500 also has good impact toughness, ensuring that it has satisfactory crack resistance during manufacturing and use.

Application

WearTuf 500 is mainly used in mining, ore and recycling industries. Common uses include: heavy-duty mining trucks and dump trucks, buckets, shovel blades, breakers, crushers, crushers, sieve plates and various wear-resistant liner parts.

Size

WearTuf 500 is available in a thickness range of 4.0-50.0 mm. Depending on the thickness of the steel plate, the width can reach 3100 mm and the length can reach 18000 mm.

Hardness guarantee value

Surface hardness: 470-530 HBW

According to EN ISO 6506-1, the surface Brinell hardness test should be carried out after the surface of the steel plate is milled to a depth of 0.5-2.0 mm.

Minimum center hardness:

Steel plate thickness ≤20 mm: minimum guaranteed value of surface hardness, 470 HBW

Steel plate thickness> 20 mm: 95% of the minimum guaranteed value of surface hardness (*)

Typical value of impact toughness:

35J/-40C (-40F):

According to the standard EN ISO 148-1, three full-size V-groove impact samples (10X10 mm2) parallel to the rolling direction are tested at -40C, and the average value of their impact energy is obtained as the impact toughness of the steel plate (**) .

chemical composition

Molten steel smelting composition: after grain refinement and full deoxidation treatment, wt%

Thickness (mm)	C max	Si max	Mn max	P max	S max	Cr max	Ni max	Mo max	CEV typical	CET typical
4.0-12.0	0.27	0.60	1.20	0.02	0.01	1.00	0.50	0.30	0.48	0.34
12.1- 25.0	0.29	0.60	1.50	0.02	0.01	1.30	0.70	0.50	0.61	0.41
25.1 50.0	0.29	0.60	1.60	0.02	0.01	1.30	0.90	0.60	0.66	0.44

Related Products

WEARTUF 500

WearTuf 500 is a full martensitic wear-resistant steel plate that has been quenched or quenched + tempered, with a typical Brinell hardness of 500 HBW. WearTuf 500 has very high wear resistance and good weldability and cold formability. Not only is the hardness very high, WearTuf 500 also has good impact toughness, ensuring that it has satisfactory crack resistance during manufacturing and use.

See details

WEARTUF 450

WearTuf 450 is a full martensitic wear-resistant steel plate that has been quenched or quenched + tempered, with a typical Brinell hardness of 450 HBW. WearTuf 450 wear-resistant steel plate also has good wear resistance, weldability and cold forming properties. Due to the high impact toughness, the steel plate has good crack resistance during manufacturing and use.

See details

WEARTUF 400

WearTuf 400 is a full martensitic wear-resistant steel plate that has been quenched or quenched + tempered, with a typical Brinell hardness of 400 HBW.

See details

LIFTHI 700

LiftHi 700 is a fully martensitic Q&T extra high strength structural steel. LiftHi 700 complies with S690QL,according to EN10025-6, but offers closer overall tolerances, improved impact toughness and work shop performance. Due to the lean composition of LiftHi 700 the weldability stays extremely good along with cold forming capability.

See details